S$900.00
| Condition | New — Surplus Stock |
|---|---|
| Manufacturer status | In production |
| Product family | Alfa Laval CPM-I-D60 |
| Product type | Service kit, product wetted parts |
| Fits | Alfa Laval CPM-I-D60 constant-pressure modulating inlet valve |
| Nominal size | 76 mm |
| Kit contents | O-ring, seal ring, two valve body seal rings, upper diaphragm, lower diaphragm (PTFE-covered EPDM, product side) |
| Max. product pressure | 1000 kPa (10 bar) |
| Min. product pressure | 0 kPa (atmospheric) |
| Temperature range | -10 °C to +95 °C; -10 °C to +140 °C with the PTFE/EPDM upper diaphragm |
| Air pressure | 0 to 600 kPa (0 to 6 bar) |
| Flow range Kv, fully open | Approx. 60 m³/h at Δp = 1 bar |
| Product wetted steel parts | AISI 316L / 1.4404 |
| Other steel parts | AISI 304 |
| Valve weight | 10 kg |
Alfa Laval 9611920119, standard service kit for the product wetted parts of the CPM-I-D60 constant-pressure modulating inlet valve, 76 mm.
Contains an O-ring, a seal ring, two valve body seal rings and both diaphragms — the product-side diaphragm is PTFE-covered EPDM. A diaphragm and plug system holds a preset product pressure by reacting to any change in it.
Alfa Laval publishes one kit number for this valve, without a seal-material variant.
3 in stock
Fast response and delivery to keep your business moving.
Every purchase is backed by our 12-month warranty.
Shop new, reconditioned, and hard-to-find automation parts.
